Monitoring The Power Supply Module; Verifying Receiver Performance (Digital Operation); Figure 5-21 Metering Screen Window - Motorola GTR 8000 Manual

5.10.2 Monitoring the Power Supply Module

Procedure Steps
1 Connect to the base radio in CSS through an Ethernet connection. See
Port Link, page
Select Service → Metering Screens from the menu.
2
Step result: The Metering Screen window opens on the Power Supply tab.

Figure 5-21 Metering Screen Window

Select the Power Supply tab.
3

5.10.3 Verifying Receiver Performance (Digital Operation)

When and where to use:
Use this procedure to verify receiver performance by measuring the Bit Error Rate (BER) and RSSI for digital
operation.
Procedure Steps
Connect to the transceiver module in CSS through an Ethernet connection. See
1
Ethernet Port Link, page
Select Service → Test and Measurement Screen from the menu.
2
3 Select the ASTRO BER RSSI Report tab.
6871022P86-A - November 2012
4-11.
4-11.

5.10.2 Monitoring the Power Supply Module

4.4.4 Connecting Through an Ethernet
4.4.4 Connecting Through an
5-35