Connecting Through An Ethernet Port Link - Motorola GTR 8000 Manual

Procedure Steps
Connect to the device using Configuration/Service Software (CSS) through a serial port link. See
1
Connecting Through a Serial Port Link, page
2 Select Security → SNMPv3 Configuration → Reset SNMPv3 Configuration (Serial) from the menu.
Step result: The Reset SNMPv3 Configuration dialog box opens.
3 Click Reset SMPv3 Configuration.
Step result: The SNMPv3 configuration is reset to factory defaults in the device.
Click Exit.
4
Step result: The Reset SNMPv3 Configuration dialog box closes.
5 To reboot the device for the SNMPv3 user credentials to take affect:
a. Select Tools → Set IP Address/Box Number or Set IP Address/BR_CM Pairing Number from the menu.
Step result: The dialog box appears.
b. Click Reset.
Step result: The device reboots.
6 Proceed to

4.4.4 Connecting Through an Ethernet Port Link

Prerequisites:
This procedure assumes CSS is loaded on the computer. See the Private Network Management Client manual if
necessary or see the instructions in the CSS CD-ROM jewel box for instructions on loading the CSS on the laptop
or computer.
When and where to use:
Use the Ethernet port link to configure All CSS parameters for the device.
Procedure Steps
1 Connect a computer (either laptop or desktop) to a device:
a. Connect an Ethernet straight through cable between the Ethernet port on the computer and the appropriate
LAN switch either locally at a site or remotely through the network.
• For a base radio, the IP address of the laptop must be set to the 192.168.1.x subnet (where x is any
• For a site controller or comparator, the IP address of the laptop must be set to an address on the
• For a comparator, the 10/100Base-T LAN is not the default Ethernet port setting. To set the correct
6871022P86-A - November 2012
4.4.5.3 Changing SNMPv3 Configuration and User Credentials Using CSS, page
number between 2 and 253). Configure the Speed/Duplex setting of the PC's Ethernet interface to
10 Mb Half Duplex.
subnet of the local site, which varies depending on the site and zone numbers.
port speed and duplex, see the CSS Online Help.

4.4.4 Connecting Through an Ethernet Port Link

4-4.
4.4.2
4-15.
4-11