Configuring Tx Power Values And Battery Type - Motorola GTR 8000 Manual

11 Click Network Services Configuration in the System tree and complete the fields on the three tabs.
For configuration details for RADIUS Services, see the Authentication Services manual. For configuration
details for SYSLOG Services, see the Centralized Event Logging, manual.
12 Click Password Configuration in the System tree and complete the fields.
Password Configuration is only required if you have passwords entered for local accounts. This sets the
password complexity and controls. For details on password complexity and controls see "Password
Configuration" in CSS Online Help.
13 Select File → Save As from the menu to save the configuration data to a new archive file or select File → Save
from the menu to overwrite the existing archive file.
Be sure to save any configuration changes to a local or network drive so that if the base radio fails, you can
load your settings to a replacement base radio. If the configuration file is not saved to a local or network
drive, you will need to repeat the setup steps after replacing a base radio.
14 Write the configuration data to the base radio, as follows:
• Select File → Write Configuration to Device from the menu.

4.4.10 Configuring Tx Power Values and Battery Type

When and where to use:
As part of the site configuration process, the Battery Type, Tx Power Level (Battery Backup), and Tx Power Out on
the Hardware Configuration tab in Configuration/Service Software (CSS) need to be configured.
6871022P86-A - November 2012

4.4.10 Configuring Tx Power Values and Battery Type

4-31