Troubleshooting
Clearing Paper Jams in the Fuser
1.
Open the Bottom Right Cover and tear off the Lead Edge from any jammed sheet. Also, clear any jammed
sheets from the Bypass (Tray 5) feeder. Then, open the Front Cover.
2.
Turn Handle 2 to the right until it is in the horizontal position, then pull out the Transfer Module.
WARNING:
Never touch a labeled area (found on the Fuser or nearby) indicating "High Temperature" and "Caution". You
may get burned.
3.
Remove the visible jammed paper.
4.
If paper is torn, check for any torn pieces of paper inside the machine.
5.
Move Handle 2a to the right and remove any jammed paper.
6.
Pull down Handle 2b and remove the jammed paper.
7.
Return Handle 2a and Handle 2b to their original position.
8.
Push in the the Transfer Module completely and turn Handle 2 to the left.
9.
Close the front cover.
294
Xerox Color 550/560 Printer
User Guide