Xerox 560 User Manual page 77

Loading Paper in the Post-Process Inserter
The Post-Process Inserter is standard on the finisher and is used to load paper that will be used as separators and
covers. The Inserter holds a maximum of 200 sheets.
1. Remove any paper that remains loaded into the Inserter.
2. Hold the center of the paper guides and slide them to the desired paper size.
3. Load the paper, aligning to the front side of the tray.
4. If the paper is preprinted, load the paper with the printed side facing up and with the tab side to be fed first.
5. After stock is loaded into the Post-Process Inserter, a pop-up window may appear asking you to change or
confirm the type and size of the stock. The tray may not be ready for use until you change or confirm the size
and type of stock.
6. If required, choose paper size, type, or color on the printer's touch screen, then touch Confirm.
If you have not changed the media type, touch Confirm on the touch screen.
7.
Printing
Xerox Color 550/560 Printer
User Guide
77