Installation and Setup
Installation and Setup Overview
Before you can use the printer, you must:
1.
Make sure the printer is connected correctly and turned on.
2.
Install software drivers and utilities.
3.
Configure the software.
Physical Connection
You can connect to the printer over a network. Connect to a functioning and dedicated fax telephone line for the
optional fax. Communication cables are not included with the printer and must be purchased separately.
To physically connect the printer:
1.
Connect the power cable to the printer, and plug it into an electrical outlet.
2.
Connect one end of a Category 5, or better, Ethernet cable to the Ethernet port in the back of the printer.
Connect the other end of the cable to your network port.
3.
If the fax option is installed, connect to a functioning telephone line using a standard RJ11 cable.
40
Xerox Color 550/560 Printer
User Guide