General Rule For Operation On User Menu; Changing Setting In Menu - Furuno DS-30 Operator's Manual

General Rule for Operation on User Menu

Opening Menu
Changing
Settings in Menu
You may open the main menu by simply pressing the MENU key. To
open one of the sub-1 menus, place the pointer ( ) on desired item in
the main menu by operating the trackball and then press the MENU
key. The item designated by the pointer is highlighted in inverse video
and the sub menu for that item is displayed to the right of it. You may
open the 3rd menu in the same manner as sub menu.
When a menu item is selected (by placing the pointer on the item and
pressing the MENU key), a selection box or setting window is
displayed to the right of the selected item. There are several types of
selection boxes and setting windows as shown change or set
parameters in any window or box.
Numeric setting window
A numeric setting window is displayed when you need to set numeric
value. For instance, ship's draft changes from ship to ship and with
loading condition, and thus value specific to your ship should be
entered.
END
Place the pointer ( ) on this mark
and then press the MENU key to
increase the numeric value.
Place the pointer ( ) on this mark
and then press the MENU key to
END decrease the numeric value.
0
Place the pointer ( ) on this mark
and then press the MENU key to
reset the numeric value to zero.
TOTAL DIS.
12345.67
Press the pointer ( ) on the digital above which you want to change
value. For instance, if you wish to change from "12345.67" to
"15745.67", place the pointer on "3" and press the MENU key. The
numerals "123" are highlighted in inverse video. Then place the
pointer on the "▲" mark and then press the MENU key to change
"123" to "157".
9-3
Cancel
END
NM
0