46
4.8.2
LightField
The following installation is performed via the LightField software installation CD.
1.
Before starting the installation:
•
•
•
2. Insert the CD and follow the installation wizard prompts. See
Figure 4-8: Typical LightField Installation Wizard Dialog
3. After the installation finishes, reboot the computer.
4. Connect the ProEM system components to your computer and power them on.
5. Start LightField, activate it, and begin setting up your experiment.
ProEM System Manual
NOTE:
Install the GigE Adapter card BEFORE installing the
LightField application software.
Verify that the computer operating system is Windows Vista (64-bit) or
Windows 7 (64-bit).
Confirm that the GigE adapter card has been installed.
Verify that your computer is connected to the Internet. Internet connection is
required for product activation.
Issue 3
Figure
4-8.