Document Organization - Teledyne ProEM Series System Manual

12
1.3

Document Organization

This manual includes the following chapters and appendices:
•
•
•
•
•
•
•
•
•
•
•
•
•
ProEM System Manual
Chapter 1, About this Manual
This chapter provides information about the organization of this document, as
well as related documents, safety information, and conventions used
throughout the manual.
Chapter 2, ProEM Camera System
This chapter provides information about the camera, interface card, cables and
application software.
Chapter 3, Installation Overview
This chapter cross-references system setup actions with the relevant manuals
and/or manual pages. It also contains system block diagrams.
Chapter 4, System Setup
This chapter provides detailed directions for setting up the camera for imaging
or spectroscopic applications and presents over-exposure protection
considerations.
Chapter 5, Operation
This chapter discusses a number of topics, including cooling and effects of high
humidity and includes a step-by-step procedure for verifying system operation.
Chapter 6, Advanced Topics
This chapter discusses standard timing {Trigger Response} modes (Free Run {No
Response}, External Sync {Readout Per Trigger}, and Continuous Cleans {Clean
Until Trigger}), Fast and Safe speed modes, Logic Level control, and the Kinetics
mode option.
Chapter 7, Tips
This chapter provides tips regarding CCD ageing, maximizing throughput, and
reducing readout time.
Chapter 8, Troubleshooting
This chapter provides courses of action to take if you should have problems
with your system.
Appendix A, Technical Specifications
This appendix provides CCD, system, and other technical specifications for the
ProEM system.
Appendix B, Outline Drawings
This appendix provides outline drawings of the ProEM system.
Appendix C, Spectrograph Adapters
This appendix includes instructions for mounting a ProEM to a Teledyne Acton
Research spectrograph adapter.
Appendix D, WinSpec/32/LightField Cross Reference
This appendix includes two alphabetically sorted tables that cross reference
terms used by WinX/32 and LightField.
Warranty and Service
This section provides the warranty and customer support contact information.
Issue 3