Appendix C: Spectrograph Adapters; Table C-1: Proem-Spectrograph Adapter Kit Cross Reference - Teledyne ProEM Series System Manual

Appendix C:
ProEM cameras for imaging are designed with a C-mount adapter to accommodate
C-mount lenses. Cameras for spectroscopy applications are designed with two
different bolt circle patterns to accommodate Teledyne Acton Research sliding tubes.
Before mounting your camera to a Teledyne Acton Research Series spectrograph, you
should follow the instructions in this appendix for attaching the appropriate
spectrograph kit and sliding tube.
Table C-1
instruction set.

Table C-1: ProEM-Spectrograph Adapter Kit Cross Reference

Teledyne Acton Research (ProEM with 3.60"/3.88"
Bolt Circles)
Teledyne Acton Research (ProEM with C-Mount)
Teledyne Acton Research SP-2350/SP-2550 (ProEM
with adjustable C- to spectroscopy-mount)
Teledyne Acton Research SP-2150/SP-2750 (ProEM
with adjustable C- to spectroscopy-mount)
Spectrograph Adapters
NOTE:
When mounted to a spectrograph, the text on the back of
the ProEM should be right side up.
cross-references the adapter kits with the page number for the appropriate
Spectrograph Adapter Kit Number
7050-0104
7050-0107
Information
begins on...
page 148
page 149
page 150
page 151
147