Figure 7-5: Typical Winx/32 Readout Time Dialog; Figure 7-6: Typical Winx/32 Hardware Setup Dialog: Custom Chip Tab - Teledyne ProEM Series System Manual

Chapter 7
10. Select Readout Time from the Acquisition menu.
The readout time is reported on the Readout Time dialog as 0.88 ms. See
Figure 7-5:
11. To further reduce the readout time, open the Hardware Setup
tab, set shutter compensation time(s) to 0 and on the Hardware Setup
Camera tab, select Skip Serial Register Clean.
See

Figure 7-6: Typical WinX/32 Hardware Setup Dialog: Custom Chip Tab

Typical WinX/32 Readout Time Dialog: 0.88 msec
Figure 7-6.
Tips 119
Figure 7-5.
►
Camera/ Controller
►
Custom