42
4.5.1
Positioning the ProEM:512BK Masks
The ProEM:512BK camera has a kinetics nose that provides built-in precision masking
capability and manual shutter adjustment. After using the pull-push sliders to coarsely
set the position of the top and bottom masks, you can then use the micro-adjust screws
while viewing images being acquired by the application software to fine tune the
masking. The pull-push knob for the manual shutter allows you to block all light from
the camera while you are acquiring a background. See
Figure 4-3: Front View of ProEM:512BK Camera
4.6
Opening/Closing ProEM:1600 Manual Shutter
ProEM:1600 cameras contain a built-in manual shutter that allows you to block all light
from the camera while you are acquiring a background. To operate the shutter, pull the
knob out to close the shutter and push it in to open it. See
Figure 4-4: Front View of ProEM:1600(2)/1600(4) Camera
ProEM System Manual
Figure
4-3.
Figure
4-4.
Issue 3