Figure 8-13: Typical Device Pop-Up Menu; Figure 8-14: Typical Adapter Properties: Settings Tab; Figure 8-15: Typical System Settings Change Dialog - Teledyne ProEM Series System Manual

Chapter 8
4. Click on that label to expand it and then right-click on one of the ports. On the
popup menu, click on Properties. See

Figure 8-13: Typical Device Pop-Up Menu

5. On the Settings tab, change the third number from the left in the IP Address. For
example, replace the 2 in the IP Address 192.168.2.1 with 4 so the IP Address
becomes 192.168.4.1. See

Figure 8-14: Typical Adapter Properties: Settings tab

6. Click on OK.
7. When the System Settings Change dialog appears, click Yes to restart your
computer now or click No to restart it later. See

Figure 8-15: Typical System Settings Change Dialog

The change will not take place until you restart the computer.
Troubleshooting
Figure 8-13.
Figure 8-14.
Figure 8-15.
135