Lightfield Requirements; Attaching A Lens To A C-Mount Adapter - Teledyne ProEM Series System Manual

38
4.3.4.2

LightField Requirements

•
•
•
•
•
•
•
4.4

Attaching a Lens to a C-Mount Adapter

ProEM cameras for imaging applications incorporate an integral C-mount adapter.
Other mounts may be available. Contact the factory for specific information relating to
your needs. Refer to
ProEM System Manual
Windows Vista (64-bit) or Windows 7 (64-bit)
2 GHz dual core processor
4 GB RAM (or greater)
CD-ROM drive
Super VGA monitor and graphics card supporting at least 65535 colors with at
least 128 MB of memory. Memory requirement is dependent on desired display
resolution.
Hard disk with a minimum of 1 GB available for installation. Additional space is
required for data storage: the amount of space required depends on the
number and size of images/spectra collected. Disk level compression programs
are not recommended. Drive speed of 10,000 RPM recommended.
Mouse or other pointing device.
NOTE:
The above requirements are the minimum for operating a
ProEM camera. A faster computer with 5 GB or larger
memory (RAM) will greatly enhance the software
performance during live mode operations.
!
CAUTION!
Overexposure Protection:
room light or other continuous light sources will quickly
become saturated. Set the lens to the smallest aperture
(highest f-number) and cover the lens with a lens cap to
prevent overexposure.
Contact Information
Cameras that are exposed to
on page 160 for complete information.
Issue 3