Table of Contents
Advertisement
Chapter 8:
Refer to
this chapter.
Table 8-1:
Acquisition Started but Data Display is Empty
Acquisition Started but Viewer Contents Do Not Update
Baseline Signal Suddenly Changes
Camera Not Found
Camera Stops Working
Camera1 (or similar name) in Camera Name field
Temperature Lock Cannot be Achieved or Maintained.
Gradual Deterioration of Cooling Capability
Data Overrun Due to Hardware Conflict message
Device Is Not Found
Device is Occupied
Ethernet Network is Not Accessible
Program Error Message
Serial Violations Have Occurred. Check Interface Cable.
Smeared Images
TEC Fault LED Comes On
WinX/32 or LightField Crashes When Adding GigE Camera to System
Troubleshooting
WARNING!
Do not attach or remove any cables while the camera
system is powered on.
Table 8-1
for issues which have recommended troubleshooting procedures in
List of Recommended Troubleshooting Procedures
Issue
Information
begins on...
page 124
page 125
page 125
page 126
page 126
page 126
page 128
page 128
page 129
page 130
page 131
page 131
page 132
page 133
page 133
page 133
page 134
123
Advertisement
Table of Contents
Troubleshooting
