Installing A Module - Avaya Ethernet Routing Switch 8300 Series Quick Start Manual

3. Tighten the screws to secure the guide to the chassis.

Installing a module

The 8310 chassis provides eight slots for installing interface modules and two slots for installing
Ethernet Routing Switch switch fabric/central processing unit (SF/CPU) modules. Slots are
numbered from top down. Install Ethernet Routing Switch 8300 interface modules in slots 1
through 4 and in slots 7 through 10. Slots 5 and 6 are reserved for Ethernet Routing Switch
8300 SF modules.
The 8306 chassis provides four slots for installing interface modules and two slots for installing
SF/CPU modules. Slots are numbered from top down.
For more information about module installation, see Avaya Ethernet Routing Switch 8300
Installation — Modules, NN46200-305.
You can install an Ethernet Routing Switch 8300 module with the power on or off.
Procedure steps
1. Locate the slot where you want to install the module.
Quick Start
The following figure shows the location of the modules in the 8306 and 8310
chassis.
Installing a module
May 2011 29