Table of Contents
Advertisement
To Manually Turn Off The Stop/Start System
Stop/Start OFF Switch
1. Push the Stop/Start OFF switch (located on
the switch bank). The light on the switch
will illuminate.
2. The "Stop/Start OFF" message will appear
in instrument cluster display within the
Stop/Start section. Refer to "Instrument
Cluster" in "Getting To Know Your
Instrument Panel" for further information.
3. At the next vehicle stop (after turning off the
Stop/Start system), the engine will not be
stopped.
4. The Stop/Start system will reset itself back
to an ON condition every time the ignition is
turned off and back on.
To Manually Turn On The Stop/Start System
Push the Stop/Start OFF switch (located on the
switch bank). The light on the switch will turn
off.
System Malfunction
If there is a malfunction in the Stop/Start
system, the system will not shut down the
engine. A "SERVICE STOP/START SYSTEM"
message will appear in the instrument cluster
display. Refer to "Instrument Cluster Display" in
"Getting to Know Your Instrument Panel" for
further information.
If the "SERVICE STOP/START SYSTEM"
message appears in the instrument cluster
display, have the system checked by an
authorized dealer.
SPEED CONTROL — IF EQUIPPED
When engaged, the Speed Control takes over
accelerator operations at speeds greater than
20 mph (32 km/h).
The Speed Control buttons are located on the
right side of the steering wheel.
STARTING AND OPERATING
Speed Control Buttons
1 — On/Off
2 — SET (+)/Accel
3 — RES/Resume
4 — SET (-)/Decel
5 — CANC/Cancel
NOTE:
In order to ensure proper operation, the Speed
Control system has been designed to shut down
if multiple Speed Control functions are operated
at the same time.
211
5
Hide quick links:
Advertisement
Table of Contents
