Jeep Grand Cherokee 2020 Owner's Manual page 291

Rear Liftgate Mounted Tail Lamp
Rear Liftgate Tail Lamps
1. Raise the liftgate.
2. Use a suitable tool to pry the lower trim from
the liftgate.
Liftgate Lower Trim
3. Continue removing the trim.
4. Disconnect the two trim panel lights.
5. Tail lamps are now visible. Rotate socket(s)
counterclockwise.
Rear Of Liftgate Tail Lamp
1 — Auxiliary LED Tail Connector – Do Not Remove
2 — Backup Bulb Socket
6. Remove/replace bulb(s).
7. Reinstall the socket(s).
8. Reverse process to reinstall the liftgate
trim.
IN CASE OF EMERGENCY
Center High Mounted Stop Lamp (CHMSL)
The center high mounted stop lamp (CHMSL) is
an LED. Service at an authorized dealer.
Center High Mounted Stop Lamp
Rear License Lamp
The rear license lamps are LEDs. See an
authorized dealer for service.
289
6