Jeep Grand Cherokee 2020 Owner's Manual page 69

CONTROL
WEATHER
SETTINGS
Set the mode control
Cool & Humid to
Conditions
turn on
windows clear.
Set the mode control
to the
windshield fogging
Cold Weather
starts to occur, move
the control to the
position.
WINDOWS
Power Window Controls
The window controls on the driver's door control
all the door windows.
position and
to keep
position. If
Power Window Switches
There are single window controls on each
passenger door trim panel, which operate the
passenger door windows. The window controls
will operate only when the ignition is in the ACC
or ON/RUN position.
If equipped, the key fob may also be used to
raise or lower vehicle windows while the ignition
is in the OFF position. Refer to "Keys" in this
chapter for further information.
NOTE:
The power window switches will remain active
for up to 10 minutes after the ignition is placed
in the OFF position. Opening either front door
will cancel this feature. The time is program-
mable. Refer to "Uconnect Settings" in "Multi-
media" for further information.
GETTING TO KNOW YOUR VEHICLE
WARNING!
Never leave children unattended in a vehicle,
and do not let children play with power
windows. Do not leave the key fob in or near
the vehicle, or in a location accessible to
children, and do not leave the ignition of a
vehicle equipped with Keyless Enter-N-Go in
the ACC or ON/RUN mode. Occupants,
particularly unattended children, can become
entrapped by the windows while operating
the power window switches. Such entrapment
may result in serious injury or death.
Auto-Down Feature
The driver door power window switch and the
front and rear passenger door window switches
have an Auto-Down feature.
Push the window switch down for half a second
and release. The window will go down
automatically.
To stop the window from going all the way down
during the Auto-Down operation, pull up or push
down on the switch briefly.
To open the window part way (manually), push
the window switch down briefly and release.
67
2