Technical Specifications; Identification Data; Vehicle Identification Number; Brake System - Jeep Grand Cherokee 2020 Owner's Manual

IDENTIFICATION DATA

Vehicle Identification Number

The Vehicle Identification Number (VIN) is found
on a label located on the left front corner of the
instrument panel pad, visible from outside of
the vehicle through the windshield.
Windshield VIN Label Location
NOTE:
It is illegal to remove or alter the VIN.

TECHNICAL SPECIFICATIONS

BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic
brake systems. If either of the two hydraulic
systems loses normal capability, the remaining
system will still function. However, there will be
some loss of overall braking effectiveness. You
may notice increased pedal travel during
application, greater pedal force required to slow
or stop, and potential activation of the Brake
Warning Light.
In the event power assist is lost for any reason
(i.e., repeated brake applications with the
engine off) the brakes will still function.
However, the effort required to brake the
vehicle will be much greater than that required
with the power system operating.
NOTE:
Due to the performance nature of our brake
systems, some noise is to be expected.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug
nuts/bolts should be torqued using a properly
calibrated torque wrench using a high quality six
sided (hex) deep wall socket.

Torque Specifications

Base Model Vehicle
Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
130 Ft-Lbs
M14 x 1.50
(176 N·m)
SRT Model Vehicle
Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
110 Ft-Lbs
M14 x 1.50
(149 N·m)
367
Lug Nut/Bolt
Socket Size
22 mm
8
Lug Nut/Bolt
Socket Size
22 mm