Jeep Grand Cherokee 2020 Owner's Manual page 104

102 GETTING TO KNOW YOUR INSTRUMENT PANEL
Driver Assist
Push and release the up or down arrow button
until the Driver Assist menu title is highlighted in
the instrument cluster display.
Adaptive Cruise Control (ACC) Menu — If
Equipped
The instrument cluster display displays the
current ACC and LaneSense system settings.
The information displayed depends on the
status of ACC and LaneSense.
Push the Adaptive Cruise Control (ACC) on/off
button (located on the steering wheel) until one
of the following displays in the instrument
cluster display:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Push and release the SET + or the SET- button
(located on the steering wheel) and the
following will display in the instrument cluster
display:
ACC SET
When ACC is set, the set speed will display in
the instrument cluster.
The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
System Cancel

Driver Override

System Off

ACC Proximity Warning

ACC Unavailable Warning

NOTE:
The instrument cluster display will return to the
last display selected after five seconds of no
ACC display activity.
Refer to "Adaptive Cruise Control (ACC) — If
Equipped" in "Starting And Operating" for
further information.
LaneSense — If Equipped
The instrument cluster display displays the
current LaneSense system settings. The
information displayed depends on LaneSense
system status and the conditions that need to
be met. Refer to "LaneSense — If Equipped" in
"Starting And Operating" for further
information.
Fuel Economy
Push and release the up or down arrow button
until the Fuel Economy Icon is highlighted in the
instrument cluster display. Push and hold the
OK button to reset average fuel economy
feature.
Toggle left or right to select a display with or
without Current Fuel Economy Information.
Range – The display shows the estimated

distance (mi or km) that can be traveled with
the fuel remaining in the tank. When the
Range value is less than 30 miles (48 km)
estimated driving distance, the Range
display will change to a "RANGE LOW"
message. Adding a significant amount of fuel
to the vehicle will turn off the "RANGE LOW"
message and a new Range value will display.
Range cannot be reset through the OK
button.