JUKI LK-1910 Engineer's Manual page 83

(49) Bank selection connection setting : This function is not used with the stndard machine. Supplementaly
explanation : P91
Function No. : 075
Item : 1 Setting of the number of terminals for bank selection
1
2
Indication
3
4
Item : 2 Setting of the starting position of the terminal for bank selection
0
1 to 16
Indication
(50) External output terminal connection setting 1 : This function is not used with the standard machine.
Function No. : 076
Item : 1 Output terminal 0 setting
0
1 to 16
Indication
Item : 2 Output terminal 1 setting
0
1 to 16
Indication
Item : 3 Output terminal 2 setting
0
1 to 16
Indication
Function : Setting of the number of terminals when the bank selection is made
by the external signal.
[Contents] Can be used up to 2 patterns.
[Contents] Can be used up to 4 patterns. : Initial setting
[Contents] Can be used up to 8 patterns.
[Contents] Can be used up to 16 patterns.
[Contents] No connection : Initial setting
[Contents] The starting position of the terminal for bank selection is set. By
this setting, only the number of the terminals specified in the item 1
can be used as the terminal for bank selection.
Function : Setting of the output device of the external output terminal
[Contents] No connection : Initial setting
[Contents] The output device of the external output 0 is set to the terminal
number. By this setting, the signal output device of the external
output 0 can be freely changed.
[Contents] No connection : Initial setting
[Contents] The output device of the external output 1 is set to the terminal
number. By this setting, the signal output device of the external
output 1 can be freely changed.
[Contents] No connection : Initial setting
[Contents] The output device of the external output 2 is set to the terminal
number. By this setting, the signal output device of the external
output 2 can be freely changed.
78
− −
(Set level 2)
(Set level 2)
(Set level 2)
(Set level 2)
(Set level 2)