JUKI LK-1910 Engineer's Manual page 115

3 CP-3 (continuous operation)
Performs the initial setting of the operation conditions, and moves to the continuous operation mode.
Step Indicating section
1
2
3
4
5
6
7
* When "CP-3" is selected, it is not able to return to the other test modes. Turn OFF the power and turn ON
the power again in accordance with the starting way of the test mode.
Checking measure
or
FORWARD BACK
READY
or
FORWARD BACK
READY
or
FORWARD BACK
READY
Sewing LED
Start switch
110
− −
A time of pause is set by pressing
down
FORWARD
Setting range : 0 to 9,900 ms
By pressing down
time of pause is updated and the
setting moves to the automatic
origin retrieual setting
Setting moves to automatic origin
retrieval setting by pressing down
or
FORWARD BACK
Setting range :
Automatic origin retrieval is updated
and setting moves to pattern No.
setting by pressing down
(When setting for the first time, "0"
is indicated. In other cases, pattern
No. that has been previously set is
indicated.)
Pattern No. will be set by pressing
down
FORWARD
Pattern No. is updated and the
mode moves to the continuous
Lights up
operation mode by pressing down
SEWING
key.
READY
Continuous operation can be
stopped at the time of pause by
depressing the pedal switch.
Explanation
or key
BACK
(in a unit of 100 ms)
key, the
READY
key.
A0 ... Ineffective
(initial setting)
A1 ... Every 100 times
A2 ... Every time
key.
READY
or key.
BACK