JUKI LK-1910 Engineer's Manual page 67

(4) Mechanical origin retrieval
Function No. : 007
Item : 1 Setting the operation of each sewing cycle
OFF
Indication
ON
Item : 2 Operation setting at the time of the moving limit error
ON
Indication
OFF
(5) Return to origin operation
Function No. : 008
Item : 1 Operation mode setting
ROUTE
HOME &
Indication
TRACE
Item : 2Setting of the return to the upper dead point only at the time of origin retrieval and return to origin
(Needle UP in the reverse rotation)
OFF
Indication
ON
(6) Counter indication setting
Function NO. : 009
Item : 1 Bobbin thread counter indication setting
UP
Indication
DOWN
Item : 2 Production counter indication setting
OFF
Indication
ON
Item : 3 Number of counter digits setting
3 FIG
Indication
4 FIG
Function : This function sets the operation of the mechanical origin retrieval.
[Contents] Not operative : Initial setting
[Contents] Origin retrieval is made for each sewing cycle.
[Contents] Origin retrieval is made when returning from the moving limit. (Initial setting)
[Contents] No operation
Function : This function sets the returning route to the sewing start when
pressing the return to origin switch.
[Contents] The machine returns to the sewing start point through the shortest
distance. : Initial setting
[Contents] The machine moves to the sewing start point along the pattern
data after the origin is retrieved.
[Contents] The machine moves to the sewing start along the pattern data in
the reverse direction. : Inversion specification • Initial setting
[Contents] Without stopping at the upper dead point : Initial setting
[Contents] With stopping at the upper dead point : Inversion specification initial
Function : Counter indication setting
[Contents] UP counter setting (When one cycle stitching completes, the value
shown on the bobbin thread counter increases by 1 count. The
counter counts the bobbin thread from 000 to 999.)
If the counter set value other than "000" is set, when the set value
has come equal to the counter set value, the sewing machine stops.
: Initial setting
[Contents] DOWN counter setting (When one cycle stitching completes, the
value shown on the bobbin thread counter decreases by 1 count.
The counter counts the bobbin thread from 999 to 000.)
If the counter set value other than "000" is set, the counter starts
counting down from the set value and if the counter value has
become "0000", the sewing machine stops.
[Contents] Does not indicate the production counter.
[Contents] Indicates the production counter. : Initial setting
[Contents] This function makes the number of indicating digits 3 digits. : Initial setting
[Contents] This function makes the number of indicating digits 4 digits.
62
− −
(Set level 2)
(Set level 2)
(Set level 1)
(Set level 1)
(Set level 1)
(Set level 1)
(Set level 2)