JUKI LK-1910 Engineer's Manual page 73

(19) Feeding frame control 1
Function No. : 030
Item : 1 Setting at the automatic opening/closing
0 to 99
Indication
Item : 2 Setting of opening/closing control at the time of pedal operation
0 to 99
Indication
Item : 3 Setting of opening/closing control at the time of pedal operation when temporary stopping
0 to 99
Indication
(20) Feeding frame control 2
Function No. : 031
Item : 1 Setting of the order of the feeding frame at the completion of the sewing
Indication
0 to 99
Item : 2 Setting of the action of the feeding frame at the completion of the sewing
ATSTART
HOLD
Indication
ATEND
Item : 3 Setting of the constant lowering of the feeding frame
OFF
Indication
ON
Function : Feeding frame device setting
[Contents] Action sequence is set when the feeding frame automatically opens/
closes in case of operating the preparation key, threading key, etc.
Initial setting "0"
[Contents] Action sequence is set when opening/closing the feeding frame at
the time of pedal operation. (Set level 1)
0 : Monolithic feeding frame
1 : Separate-type feeding frame Feeding frame can be lowered
from either right- or left-side.
2 : Separate-type feeding frame The right-side is prior. Feeding
frame can be lowered in the order of right- to left-side.
3 : Separate-type feeding frame The left-side is prior. Feeding frame
can be lowered in the order of the left- to right-side.
4 to 99 : Monolithic feeding frame
[Contents] Action sequence is set when opening/closing the feeding frame at
the time of pedal operation when temporary stopping.
0 : Monolithic feeding frame
1 : Separate-type feeding frame Feeding frame can be lowered from
either right- or left-side.
2 : Separate-type feeding frame The right-side is prior. Feeding
frame can be lowered in the order of right- to left-side.
3 : Separate-type feeding frame The left-side is prior. Feeding frame
can be lowered from left- to right-side.
4 to 99 : Monolithic feeding frame
Function : Feeding frame setting
[Contents] Initial setting 0 (release at all times) : when item "RELEASE" setting only.
[Contents] Feeding frame is opened after the completion of the sewing. (After
moving to the sewing start point, the feeding frame is opened and
waits.) : Initial setting
[Contents] Feeding frame is not opened after the completion of the sewing.
(After moving the sewing start point, the feeding frame is kept
lowered and waits. It is opened by pedal operation.)
[Contents] Feeding frame is opened immediately after the completion of the
sewing. (After the completion of the sewing, the feeding frame is
opened and moves to the sewing start point.)
[Contents] Constant lowering action is rendered ineffective. : Initial setting
[Contents] Constant lowering action is rendered effective. Feeding frame is in the
lowering state at all times, and is not operative by the pedal operation.
68
−
Complementary explanation → P.99
Complementary explanation → P.101
−
(Set level 2)
(Set level 1)
(Set level 1)
(Set level 2)
(Set level 1)
(Set level 1)