JUKI LK-1910 Engineer's Manual page 78

(35) Sewing machine speed control 2
Function No. : 051
Item : 1 Soft-start 4
2 to 25 X 100 r.p.m [Contents] Speed after 3 stitches when the sewing machine is actuated is set.
Indication
Item : 2 Soft-start 5
2 to 25 X 100 r.p.m [Contents] Speed after 4 stitches when the sewing machine is actuated is set.
Indication
(36) X-Y JOG feed speed shifting time : Normally use this function without changing the standard setting.
Function No. : 052
Item : 1 First speed shifting time of JOG mode
1 to 99 x 100 ms [Contents] Setting of the length of time from the JOG speed to the medium
Indication
Item : 2 Second speed shifting time of JOG mode
1 to 99 x 100 ms [Contents] Setting of the length of time from the medium speed to the start of
Indication
Item : 3 Third speed shifting time of JOG mode
5 to 99 x 100 ms [Contents] Setting of the length of time to the maximum speed : Initial setting 50
Indication
(37) Key input time function
Function No. : 053
Item : 1 First interval time : Normally use this function without changing the standard setting.(Set level 2)
1 to 99 x 100 ms [Contents] Setting of the interval time between the time when the first key is
Indication
Item : 2 Second interval time : Normally use this function without changiing the standard setting.
1 to 99 x 100 ms [Contents] Setting of the interval time after the third time of the read-in of the
Indication
Item : 3 Third interval time
1 to 99 x 100 ms [Contents] The length of time until the action is consecutively made at the time of
Indication
Function : Starting speed (after 3 stitches to after 4 stitches) of the sewing
machine is set.
(Initial setting 25)
(Initial setting 25)
Function : The accelerating time is set when the key is consecutively pressed
for the consecutive forward/backward of the feed or the like.
speed : Initial setting 4
acceleration to the maximum speed : Initial setting 12
Outline of X-Y JOG feed
Speed
First speed
shifting time
Function : Setting the interval of the time that a consecutively pressed key
reads in repeatedly
ON and the second one. : Initial setting 4
key : Initial setting 1
forward/backward of the feed (the case where forward/backward of the
feed is made even when the key is released.). : Initial setting 30
73
−
Max. speed
Second speed
shifting tim
−
(Set level 2)
(Set level 2)
(Set level 2)
Time
(Set value 2)
(Set level 2)