JUKI LK-1910 Engineer's Manual page 58

2 Operation when the indication is "0 3 - -".
Step
2 -1
2 -2
FORWARD
2 -3
2 -4
2 -5
Operation method
or
FORWARD BACK
READY
READY
or
BACK
SELECT
READY
Indication
Sewing LED
SEWING
Lights up.
Sewing LED
SEWING
Put out.
[Ex.] Calling of the
standard pattern
R
data to pattern
RESET
No. 1 is possible.
Sewing LED
SEWING
Put out.
53
− −
Explanation
Press down or key
FORWARD BACK
to select the indication No. 3.
Press down key to light
READY
up Sewing LED.
When the step is 2 - 2, if
READY
key is pressed twice, Sewing
LED is put out and the
indication returns to No. 03.
Press down or key
FORWARD BACK
to change whether or not to call
the standard pattern data.
(The setting returns to the initial
R
value by pressing down
RESET
key.)
Every time key is
SELECT
pressed, the pattern No.
increases by one. (Pattern
Nos. : 1 to 64)
When the pattern No. is
changed to the No. desired,
change whether or not to call
the standard pattern by
operating the step 2 - 3.
After the pattern No. 64, the
pattern No. returns to the
Pattern No. 1.
After setting, press down
READY
key to put out Sewing LED and
register.