JUKI LK-1910 Engineer's Manual page 137

Adjustment Procedures
1) Loosen setscrew 1 and remove thread guide plate 2.
1) Install air tube 3 to tension controller No. 3 4 and install the
controller almost horizontally to the machine arm with setscrew
5.
* Refer to Fig. 1 for threading.
(Caution) 3, 4 and 5 only are included in tension controller
No. 3 asm. (B50192220B0).
P r e p a r e s e p a r a t e l y 3 ( s o l e n o i d v a l v e :
PV150209000), 5(plug : PX500014000) and 6
(solenoid valve connector asm. : 14204754)
described on the next page.
Results of Improper Adjustment
132
− −