JUKI LK-1910 Engineer's Manual page 107

Function No. 32 Pedal input control (1)
This function sets the way of pedal operation.
Item 1 : Sets the pedal operation of the pedal 1 (feeding frame, right).
Set value FLIP or LATCH (Refer to the table 4.) Initial setting :
Item 2 : Sets the pedal operation of the pedal 2 (feeding frame, left).
Set value FLIP or LATCH (Refer to the table 4.) Initial setting : LATCH (Solenoid type : Not used)
Item 3 : Sets the pedal operation of the pedal 3 (stroke presser 1).
Set value FLIP or LATCH (Refer to the table 4.) Initial setting : LATCH
(However, this function is not used with the LK-1930.)
Function No. 33 Pedal input control (2)
This function sets the way of pedal operation. (This function sets the continuation of the function No. 32.)
Item 1 : Sets the pedal operation of the pedal 4 (stroke presser 2).
Set value 0 or 1 (Refer to the table 4.) Initial setting : LATCH
(However, this function is not used with the LK-1930.)
[Explanation of the operations of the respective settings]
Setting
The feeding frame is lowered only
when the pedal is depressed.
FLIP
If the pedal is depressed for the first
time, the feeding frame is lowered,
and kept lowered even when the
pedal is released.
LATCH
If the pedal is depressed for the
second, the feeding frame will be
raised.
Description
−
Remarks
Table 4
102
−
Solenoid type : Non latch
Pneumatic type : Latch