JUKI LK-1910 Engineer's Manual page 66

(3) Jog function setting
Function No. : 003
Item : 1 Mode specification
OFF
PARA
2ND
Indication
Item : 2 Use of the fixed turn-out position
OFF
ON
Indication
Function : Jog mode is set.
[Contents] Moving of the feeding frame cannot be made with jog keys,
, , ,
[Contents] A sewing pattern can be moved to a specified position by using jog keys
, , ,
If the 2nd origin is set in the sewing pattern, the 2nd origin also moves.
If pressing the
pattern, this function is released.
<Example>
Mechanical origin
[Contents] The 2nd origin is set to the place specified by the jog keys,
, , ,
If the 2nd origin is set in the sewing pattern, the machine does not
stop at the 2nd origin in the sewing pattern.
If pressing the
pattern, this function is released. : Initial setting
<Example>
Mechanical origin
[Contents] The fixed turn-out position is not used. : Initial setting
[Contents] Based on the coordinate set in the EEP-ROM, the 2nd origin
common to each sewing pattern is used.
The machine does not stop at the 2nd origin in the sewing pattern.
Also, the movememt of the feeding frame cannot be made by the
jog key.
Refer the setting way of the fixed turn-out position to P90.
61
−
, , and .
, , , and → the return-to-origin key.
key two times or reading another sewing
→ the return-to-origin key.
, and
key two times or reading another sewing
Mechanical origin
(Set level 2) Complementary explanation → P90
−
(Set level 1)
Moves by jog key.
,
2nd origin set by jog key
,
,