JUKI LK-1910 Engineer's Manual page 100

[Setting flow chart when using the bank function]
Start the memory switch
Change the contents of function No.
Write-in of the changed contents
After completing the write-in, turn OFF the power
Bank mode starts by starting under the normal mode.
[Panel indication after setting the bank function]
After setting the memory switch, when the machine is started under the bank mode, the panel indication
will be as follows :
No : 000
XS : 000
YS : 000
BC : 000
[Explanation of panel indication under the bank mode]
No : 000
XS : 000
YS : 000
BC : 000
Flow chart until the bank function is set is as shown in
the figure left.
By this panel indication, the bank function is
BNK-BLK
effective and the bank mode is actuated.
EXT
PC : 0000
According to the contents of the setting of the
BNK-BLK
item 3 of Function No. 21 of the memory
EXT
switch, following indications are given :
PC : 0000
95
− −
When "EXT" is set : EXT
When "PANEL" is set : PANEL
When "ROT" is set : ROT