JUKI LK-1910 Engineer's Manual page 70

(14) Bank function setting
Function No. : 021
Item 1 : With/without the bank operation and setting of the number of banks
0
Indication
1 to 16
Item : 2 Pattern data read-in method setting
SEQ
Indication
PANEL
Item : 3 Selection setting
EXT
PANEL
Indication
ROT
(15) Combination function setting
Function No. : 022
Item : 1 This function sets the operation mode of combination function
NO USE
OVERLAP
O + PAUSE
Indication
APPEND
A + PAUSE
Function : This function sets bank operation.
[Contents] Bank function is ineffective. (Bank function does not work.) : Initial setting
[Contents] This function sets the number of banks to be used.
[Contents] Consecutive-number reading (From the specified pattern No., as
many as patterns specified in the item 1 are read in bank
consecutively.) : Initial setting
[Contents] Specified-number reading (From the operation panel, bank Nos.
and pattern Nos. are specified and read in the bank. However, the
bank numbers are from 0 to 9.)
[Contents] Setting by an external input terminal (A bank pattern corresponding to the
bank No. (0 to F binary) selected by the external input terminal is sewn.
Initial setting
[Contents] The bank is specified from the operation panel. (By combination of
[PATTERN NO.] key + [NUMERIC] key, the bank number can be specified.)
[Contents] Specifying the bank + Automatic update from the operation panel (Bank
No. is automatically updated from the bank number set in the set value 1
whenever one cycle of sewing is completed, and the sewing is made.)
Function : Mode selection of the combination function
[Contents] Combination mode is ineffective. : Initial setting
[Contents] Patterns are combined at the center of the origin.
Refer to P96 <Example 1>.
[Contents] Patterns are combined at the center of the origin, and a temporary
stop is added.
Refer to P96 <Example 2>.
[Contents] Patterns are combined at the sewing end and sewing start.
Refer to P96 <Example 3>.
[Contents] Patterns are combined at the sewing end and sewing start, and a
temporary stop is added.
Refer to P96 <Example 4>.
65
−
Complementary explanation → P.91
Complementary explanation → P.91
−
(Set level 2)
(Set level 2)
(Set level 2)
(Set level 2)