2Do 24 Vdc/0.5 A Standard Digital Electronic Module; (6Es7132-4Bb00-0Aa0) - Siemens SIMATIC ET 200S Manual

12.11

2DO 24 VDC/0.5 A Standard digital electronic module

(6ES7132-4BB00-0AA0)

Order number
6ES7132-4BB00-0AA0
Features
• Digital electronic module with two outputs
• Output current 0.5 A per output
• Rated load voltage 24 VDC
• Suitable for solenoid valves, DC contactors, and indicator lights
Peculiarity
When you connect the 24 VDC rated load voltage to the power module by means
of a mechanical contact, depending on the circuit the digital outputs carry the "1"
signal for approximately 50 ms. You need to take this into account if you connect
the module to fast counters.
Terminal assignment
The following table indicates the terminal assignment of the 2DO 24 VDC, 0.5 A
Standard for the different terminal modules:
Table 12-19 Terminal assignment of the 2DO 24 VDC/0.5 A Standard
View
TM-E15S24-A1 and 2DO 24 VDC/0.5 A Standard
CH0
DO
0
1
24 VDC
2
M
3
AUX1 (e.g. PE)
A A
4
ET 200S Distributed I/O System
EWA-4NEB780602402-09
CH1
2 conductors 3 conductors 4 conductors
DO
1
5
24 VDC
6
M
7
AUX1 (e.g. PE)
8
When there are 4 conductors,
AUX1 must be applied to PE.
Terminal assignment
Digital Electronic Modules
Remarks
Channel 0:
Terminals 1 to A4
Channel 1:
Terminals 5 to A8
DO: Output signal
(maximum 0.5 A per
channel)
24 VDC: Sensor supply
M: Ground, load power
supply
12-49