Siemens SIMATIC ET 200S Manual page 386

Analog Electronic Modules
Section
13.14
13.15
13.16
13.17
13.18
13.19
13.20
13.1 Analog value representation
Section
13.1.1
13.1.2
13.1.3
Electronic modules with analog inputs
You can use electronic modules with analog inputs to record, evaluate, and convert
continuously changing signals to digital values that you can process further.
Examples of such continuously changing signals are those that occur when
measuring temperature or pressure.
Electronic modules with analog outputs
The electronic modules with analog outputs allow digitized values that are input by
means of a controller to be converted in an analog output module to a
corresponding analog signal (current or voltage) to control actuators (setpoint input
for speed controllers, temperature controllers, etc.).
13-2
2AI RTD High Feature analog electronic module
(6ES7134-4NB50-0AB0)
2AI TC Standard analog electronic module
(6ES7134-4JB00-0AB0)
2AI TC High Feature analog electronic module
(6ES7134-4NB00-0AB0)
2AO U Standard analog electronic module
(6ES7135-4FB00-0AB0)
2AO U High Feature analog electronic module
(6ES7135-4LB01-0AB0)
2AO I Standard analog electronic module
(6ES7135-4GB00-0AB0)
2AO I High Feature analog electronic module
(6ES7135-4MB01-0AB0)
Analog value representation for measuring ranges with
SIMATIC S7
Analog value representation for the measuring ranges of the
analog input modules in SIMATIC S7 format
Analog value representation for the measuring ranges of the
analog output modules in SIMATIC S7 format
Description
Description
ET 200S Distributed I/O System
Page
13-80
13-88
13-93
13-97
13-101
13-105
13-109
Page
13-4
13-5
13-16
EWA-4NEB780602402-09