Wiring Terminal Modules For Electronic Modules - Siemens SIMATIC ET 200S Manual

Wiring terminal modules for digital, analog, and technology modules
The terminal assignment of the terminal module depends on which electronic
module is inserted. You will find information on this in the following chapters:
• Terminal modules in Chapter 10
• Digital electronic modules in Chapter 12
• Analog electronic modules in Chapter 13
• Process-related module: See the process-related functions manual
TM-E15S26-A1 and electronic
module/process-related module
Channel 0
CH0
Channel 0/2
CH0/2
1 5
2 6
3 7
4 8
A A
4 8
A A
3 7
AUX1 bus (PE) fed through. Connection to ter-
minals A4, A8 and A3, A7.
TM-E15S24-01 and electronic module/
process-related module
Channel 0
CH0 CH0
Channel 0/2
CH0/2
1 5
2 6
3 7
4 8
AUX1 bus (PE) fed through. No connec-
tion to terminals 4 and 8.
Figure 5-9

Wiring terminal modules for electronic modules

ET 200S Distributed I/O System
EWA-4NEB780602402-09
TM-E15S24-A1 and electro-
nic module
Channel 0
Channel 1
CH0
CH1
Channel 0/2
Channel 1/3
CH0/2
CH1/3
AUX1 bus (PE) fed through. Connec-
tion to terminals A4 and A8.
Channel 1 Channel 1
CH1
Channel 1/3
CH1/3
Channel 1 Channel 0
CH1
Channel 1/3 Channel 0/2
CH1/3
1 5
2 6
3 7
A A
4 8
TM-E15S24-AT and 2AI TC
High Feature
Channel 0
CH0
1
2
AUX1 bus (PE) fed through. No connection
to the terminals of the terminal module.
Wiring and Fitting
TM-E15S23-01 and electro-
nic module
Channel 1
CH0 CH1
Channel 1/3
CH1/3
CH0/2
1 5
2 6
3 7
AUX1 bus fed through.
No connection to the ter-
minals.
Channel 1
CH1
5
6
5-17