Siemens SIMATIC ET 200S Manual page 117

Connectable cables
You can connect rigid and flexible cables with PVC insulation with a conductor
cross-section of 0.5 mm
cross-section of the conductors is the same, they can be wired fifty times. You can
find a list of tested conductors at:
http://www.idc2.de
Cables and connections complying with UL
Wiring range for insulating piercing connection 22 -16 AWG solid/stranded PVC
insulated conductors, UL style no. 1015 only.
Wiring terminal modules with Fast Connect
1. Insert the unstripped cable in the round opening until it stops (the insulation
and conductor must form a flat surface).
2. Insert the screwdriver into the opening above the locking mechanism until it
stops.
3. Press the screw driver downwards until the locking mechanism reaches the
end.
Result: The cable is connected.
Note
If you want to reconnect a cable that has already been connected, you must first
cut it off.
ET 200S Distributed I/O System
EWA-4NEB780602402-09
2 2
to 1.5 mm (max. external diameter 3.2 mm). If the
3 mm
2
1
Wiring and Fitting
3
5-13