Siemens SIMATIC ET 200S Manual page 373

12.18 2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A digital
electronic module (6ES7132-4HB00-0AB0)
Order number
6ES7132-4HB00-0AB0
Note
If you connect an extra-low voltage system (SELV/PELF) on one channel of the
2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A, you can only use an extra-low
voltage system (SELV/PELF) on the other channel.
As of version 2 of the 2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A there is no
longer an internal jumper between terminals 2 and 6. If you need this jumper, you
can replace it with an external jumper between terminals 3 and 7 (see
Figure 12-20).
Features
• Digital electronic module with two relay outputs
• Output current 5 A per output
• Rated load voltage up to 120 VDC and up to 230 VAC
• Suitable for solenoid valves, DC contactors, and indicator lights
• Isolated from the supply voltage
Caution
!
The rated supply voltage of the 2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A is
24 VDC. The 2RO NO 24–120 VDC/5 A, 24–230 VAC/5 A can only be located in a
potential group with 24 VDC (from the power module).
ET 200S Distributed I/O System
EWA-4NEB780602402-09
Digital Electronic Modules
12-77