Siemens SIMATIC ET 200S Manual page 242

Interface Modules
Technical specifications
Dimensions and weight
Dimensions
W H D (mm)
Weight
Data for specific modules
Transmission rate
Bus protocol
Interface
SYNC capability
FREEZE capability
Manufacturer ID
Direct communication
Clocking
Max. output current of
the PROFIBUS-DP
interface (5, 6)
Voltages, currents, potentials
Rated supply voltage of
the electronic
1)
components (1L+)
•
Reverse polarity
protection
•
Power failure
bypass
Isolation
•
Between the
backplane bus and
electronic
components
•
Between the
PROFIBUS-DP and
electronic
components
•
Between the supply
voltage and
electronic
components
Permitted potential
difference (to the rail)
Insulation tested with
9-12
45 x 119.5 x 75
Approx. 150 g
9.6; 19.2; 45.45; 93.75;
187.5; 500 kbps, 1.5 ; 3;
6; 12 Mbps
PROFIBUS-DP
RS 485
Yes
Yes
806A
H
Yes
No
80 mA
24 VDC
Yes
Min. 20 ms
No
Yes
No
75 VDC, 60 VAC
500 VDC
Current consumption
from rated supply
voltage (1L+)
Power dissipation of the
module
Status, interrupts, diagnostics
Interrupts
Diagnostic function
•
Group error
•
PROFIBUS-DP bus
monitoring
•
Monitoring of the
power supply
voltage of the
electronics
1)
Fusing the supply voltage:
– Fuse type: 24 V/2.5 A /type C
– Inrush current: 3.5 A
Approx. 200 mA
Typ. 3.3 W
None
Yes
Red "SF" LED
Red "BF" LED
Green "ON" LED
ET 200S Distributed I/O System
EWA-4NEB780602402-09