Siemens SIMATIC ET 200S Manual page 196

General Technical Specifications
FM Approval
Factory Mutual Research (FM) in accordance with
Approval Standard Class Number 3611, 3600, 3810
APPROVED for use in
Class I, Division 2, Group A, B, C, D Tx;
Class I, Zone 2, Group IIC Tx
The ET 200S motor starters do not have FM approval. All the other modules
of the ET 200S have FM approval.
In accordance with EN 50021 (Electrical apparatus for potentially explosive
atmospheres; Type of protection "n")
Identification for Australia
The ET 200S Distributed I/O System fulfills the requirements of
AS/NZS 2064 (Class A).
IEC 61131
The ET 200S distributed I/O system fulfills the requirements and criteria of
IEC 61131-2 (programmable logic controllers, Part 2: equipment requirements and
tests).
PROFIBUS Standard
The ET 200S distributed I/O system is based on the
IEC 61784-1:2002 Ed1 CP 3/1.
Shipbuilding Approval
Classifying organizations:
• ABS (American Bureau of Shipping)
• BV (Bureau Veritas)
• DNV (Det Norske Veritas)
• GL (Germanischer Lloyd)
• LRS (Lloyds Register of Shipping)
• Class NK (Nippon Kaiji Kyokai)
7-4
II 3 G EEx nA II T4..T5
ET 200S Distributed I/O System
EWA-4NEB780602402-09