Digital Electronic Module 2 Ro Relay Uc60V/2A - Siemens SIMATIC ET 200iSP Operating Instructions Manual

Digital electronic modules

12.3 Digital electronic module 2 RO Relay UC60V/2A

Figure 12-5
Note
Only safety barriers with equipotential bonding are permitted!
Connect the safety barrier and the (last) digital output module controlled by the switching signal
securely to the equipotential bonding. With this wiring, all the chassis grounds of the outputs
are connected to the equipotential bonding.
See also
Removing and inserting electronics modules during operation (hot swapping) (Page 186)
Interface module IM 152 (Page 227)
12.3 Digital electronic module 2 RO Relay UC60V/2A
Order number
6ES7132-7HB00-0AB0
254
Actuator disconnection with 11 V supply from the Watchdog module
Operating Instructions, 11/2017, A5E00247483-07
ET 200iSP