Figure 5-2 shows the overall setup of the ET 200S distributed I/O system (load
power supply and grounding concept) with the ET 200S Power Supply and an
incoming supply from a TN-S system.
L1
L2
L3
N
PE
Rail
Alternative*
AC
DC
AC
AC
* Connection to N:
Connection to L3:
Figure 5-2
Operating the ET 200S with grounded reference potential (with the ET 200S Power Supply)
ET 200S Distributed I/O System
EWA-4NEB780602402-09
ET 200S
SIMATIC
ET 200S
Power Supply
1L+
L1
N
1M
L3
PE
Ground bus
230 V power supply
400 V power supply
Low-voltage distribution – TN-S
system, for example (3
FG: Functional ground to divert noise
directly to the DIN rail by means of a
spring contact
FG FG FG FG FG FG FG
FG
Load circuit
400 VAC for motor starters
24 VDC load circuit for electronic modules and
motor starters
120 VAC/230 VAC load circuit for AC modules
Wiring and Fitting
400 V)
PE
(AUX1)
Shield contact for cable
shields
5-7