14.4
Shipping and storage conditions
Introduction
The ET 200SP distributed I/O system exceeds requirements in terms of shipping and
storage conditions according to IEC 61131-2. The following information applies to modules
that are shipped and/or stored in their original packaging.
Table 14- 7
Type of condition
Free fall (in shipping package)
Temperature
Barometric pressure
Relative humidity
Sinusoidal oscillations according to
IEC 60068-2-6
Impact acc. to IEC 60068-2-27
1) Not applicable to motor starters
Distributed I/O system
System Manual, 09/2019, A5E03576849-AJ
Shipping and storage conditions for modules
1)
14.4 Shipping and storage conditions
Permissible range
≤1 m
From -40 °C to +70 °C
from 1140 to 660 hPa (corresponds to an elevation
of -1000 to 3500 m)
5% to 95%, without condensation
5 - 8.4 Hz: 3.5 mm
8.4 - 500 Hz: 9.8 m/s
2
250 m/s
, 6 ms, 1000 shocks
2
Technical specifications
281