Siemens SIMATIC ET 200SP System Manual page 129

Wiring
6.15 Labeling ET 200SP
Applying color identification labels
Press color identification labels into the terminal box of the BaseUnit.
Note
To remove the color identification labels, you must first disconnect the wiring on the
BaseUnit and then carefully lever the color identification labels out of the holder using a
screwdriver.
①
②
③
④
⑤
Figure 6-17
128
Module-specific color identification labels (15 mm) for the process terminals. You can find addi-
tional information in the I/O Module
(http://support.automation.siemens.com/WW/view/en/55679691/133300) manual.
Color identification labels (15 mm) for the 10 AUX terminals
Color identification label (15 mm) for the 10 add-on terminals
Color identification labels (20 mm) for the 4 AUX terminals
Color identification labels (20 mm) for the 2 AUX terminals
Applying color identification labels (example)
Distributed I/O system
System Manual, 09/2019, A5E03576849-AJ