Siemens SIMATIC ET 200SP System Manual page 194

SIMATIC Automation Tool
You can use the SIMATIC Automation Tool to perform commissioning and maintenance
activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of
the TIA Portal.
General function overview:
● Network browsing and creation of a table showing the accessible devices in the network.
● Flashing of device LEDs or HMI display to locate a device
● Loading addresses (IP, subnet, gateway) into a device
● Loading the PROFINET name (station name) into a device name
● Placing a CPU in RUN or STOP mode
● Setting the time in a CPU to the current time of your programming device/PC
● Downloading a new program to a CPU or an HMI device
● Downloading from CPU, downloading to CPU or deleting recipe data from a CPU
● Downloading from CPU or deleting data log data from a CPU
● Backup/restore of data from/to a backup file for CPUs and HMI devices
● Downloading service data from a CPU
● Reading the diagnostics buffer of a CPU
● General reset of a CPU's memory
● Resetting devices to factory settings
● Downloading a firmware update to a device
● ...
You can find the SIMATIC Automation Tool on the Internet
(https://support.industry.siemens.com/cs/ww/de/view/98161300).
Distributed I/O system
System Manual, 09/2019, A5E03576849-AJ
Commissioning
11.1 Overview
193