Siemens SIMATIC ET 200SP System Manual page 32

Accessories of the ET 200SP distributed I/O system
Table 3- 3 Accessories of the ET 200SP
Accessories
24 V DC connector
Shield connection
Labeling strips
Reference identification
labels
Color identification labels
Distributed I/O system
System Manual, 09/2019, A5E03576849-AJ
Function
Applying the 24 V DC supply at the connector and
connection with the CPU/interface module, for exam-
ple.
The shield connection allows the low-impedance
contacting of cable shields with minimum installation
times.
Attach the labeling strips to the modules for system-
specific labeling of the ET 200SP. The labeling strips
can be printed.
The labeling strips can be ordered as accessories
(Page 291) on a roll for thermal transfer printers or as
DIN A4 format sheets for laser printers.
The labels enable the reference identification labeling
of the ET 200SP components.
The labels can be ordered on a mat for thermal
transfer and inkjet printers as accessories
(Page 291).
The color identification labels are module-specific
and can be ordered for the process terminals, AUX
terminals and additional terminals as accessories
(Page 291).
System overview
3.4 Components
Figure
31