Technical specifications
11.6 Mechanical and climatic ambient conditions
24 V supply connection
The following table shows measuring ranges of the power supply according to EN 55016.
Table 11-5 Interference emission from the power supply
Frequency
0.15 ... 0.5 MHz
0.5 ... 30 MHz
11.5
Transport and storage conditions
Transport and storage conditions
The I/O devices of the ET 200eco PN M12-L distributed I/O system exceed the specifications
regarding transport and storage conditions pursuant to IEC 61131-2. The following table
shows the conditions that apply to I/O devices transported or stored in their original
packaging.
Table 11-6 Transport and storage conditions
Type of condition
Free fall
Temperature
Temperature variation
Barometric pressure
Relative humidity
11.6
Mechanical and climatic ambient conditions
Rated conditions
The ET 200eco PN M12‑L distributed I/O system is suitable for use in weather-proof, fixed
locations.
• The rated conditions exceed the requirements according to IEC 61131-2
– Class OTH2
You can find the values for the rated conditions in the technical specifications of the
equipment manuals or on the Internet
(https://support.industry.siemens.com/cs/de/en/view/109742718).
102
Interference emission
< 89 dB (µV) Q
< 76 dB (µV) M
< 83 dB (µV) Q
< 70 dB (µV) M
Permitted range
≤0.3 m
-40 °C ... +70 °C
20 K/h
1140 ... 540 hPa
(corresponds to an altitude of -1000 m to 5000 m)
5 ... 95%
Distributed I/O system ET 200eco PN M12-L
System Manual, 11/2023, A5E48753295-AG