4 Replacement Procedures
4
Replacement Procedures
4.19 USB Board
Removing the USB Board
To remove the USB board, follow the steps below and refer to figure 4-34.
1. Remove the following screw securing the USB board.
M2.5 4
2. Remove the USB cable from the two guides and remove the USB board by lifting it up
directly.
USB Board
4-62
FLAT HEAD screw
Figure 4-34 Removing the USB board
1
M2.5 4 FLAT HEAD screw
USB cable
TECRA M1 Maintenance Manual (960-436)
4.19 USB Board