Procedure 4 Replacement Check - Toshiba Tecra M1 Maintenance Manual

2.13 Bluetooth Troubleshooting
Procedure 4 Replacement Check
Check 1 The Bluetooth module may be defective or damaged. Replace the Bluetooth
module with a new one following the steps in Chapter 4, Replacement
Procedures. If the Bluetooth is still not functioning properly, perform Check 2.
Check 2 The system board may be defective or damaged. Replace the system board with a
new one following the steps in Chapter 4, Replacement Procedures.
TECRA M1 Maintenance Manual (960 -436)
2 Troubleshooting Procedures
2-53