Toshiba Tecra M1 Maintenance Manual page 280

4 Replacement Procedures
Bluetooth SUMI card
PJ4900
Installing the Bluetooth Module
To install the Bluetooth module, follow the steps below and refer to figure 4-25.
1. Connect the Bluetooth SUMI card to the connector on the Bluetooth module.
2. Connect the Bluetooth SUMI card to PJ4900 on the system board.
3. Place the Bluetooth module.
4. Secure the Bluetooth module with the following screw.
M2 3 SUPER FLAT screw
5. Connect the Bluetooth coaxial cable (brown) to the Bluetooth module.
4-48
Figure4-25 Removing the Bluetooth module
4.14 Bluetooth Module
M2 3 SUPER FLAT screw
Bluetooth module
Bluetooth antenna cable
1
TECRA M1 Maintenance Manual (960-436)