4.25 Fluorescent Lamp
5. Turn the bezel face down, and remove the two screws (E) fixing the lamp cover (F) and
remove the lamp cover. Then replace the lamp unit (G) with a new one.
Figure 4-66 Replacing Sharp fluorescent lamp (SXGA+) (5)
TECRA M1 Maintenance Manual (960-436)
(F) Lamp cover
(E)
4 Replacement Procedure
Screw tightening torque:
0.1078N m (1.1kgf cm)
(E)
(G) Lamp unit
4-105